About Ezlo Protect Installer
Ezlo Installer is for use by an authorized installer only. Used to configure and troubleshoot the Ezlo platform. Using the checkout feature, please ensure that the system is properly configured before leaving the client’s...
Ezlo Installer is for use by an authorized installer only. Used to configure and troubleshoot the Ezlo platform. Using the checkout feature, please ensure that the system is properly configured before leaving the client’s home.
Version History **Professional Monitoring Enhancements:** • Improved CMS integration and zone management • Fixed professional monitoring activation status display • Corrected confirmation dialogs for CMS providers • Better security threat item handling **Installation & Onboarding:** • Resolved Wi-Fi onboarding issues • Fixed app crash during device inclusion • Added Entry/Exit delay settings for security systems • Improved sensor group loading **Bug Fixes:** • Fixed UV sensor display for Aeotec Multisensor 7 • Corrected motion detection controls for cameras • Resolved authentication and session handling issues • Enhanced camera and device management • Multiple stability improvements **Performance:** • Faster app performance with optimized diagnostics • Improved connection reliability • Enhanced audio session management • Better error tracking and diagnostics 1.43 Sep 1 What's New: This update brings important improvements to the Installer app, enhanced sensor enrollment, and several bug fixes: Enhanced Sensor Enrollment (345 MHz Radio Sensors): - Improved "Learn Sensors" experience with updated icons and clearer labeling - Added Tamper-only and All Signals discovery modes for better sensor detection - Enhanced sensor information display showing device types when available - Fixed issue where sensors could be enrolled without required sensor group assignment Installer App Improvements: - Fixed camera naming issues - default names now respect 20-character limit - Camera rename function now displays proper text instead of technical tokens - Improved error message display on failed camera streams - Fixed VistaCam 703 camera pairing timeout handling - Resolved overlapping navigation bars on iPad - Motion sensor status now shows user-friendly labels Security & Device Management: - Fixed S2 device encryption on iOS installer - devices now properly encrypt during enrollment - Improved Honeywell DPW plugin compatibility - Fixed wireless setup for controller onboarding - Streamlined sensor group assignment workflow User Experience: - Removed siren volume and sound selection per product requirements - Removed unnecessary confirmation dialogs for smoother sensor group assignments 1.42 Aug 7 Improvements related to installer access to customer accounts 1.41 Jul 10 * Added support for camera settings and AI feature configuration in the Installer app. * Improved sensor group management and validation. * Enhanced notification reliability and system configuration. * General performance improvements and bug fixes. 1.40 Jun 30 Improvements related to camera onboarding 1.39 Jun 22 Bug fixes and improvements 1.38 May 29 • Improved overall app stability and performance • Fixed minor bugs and usability issues 1.37 May 20 Added a new scanner to easily add 345 devices 1.36 May 19 We’ve fixed several issues to make device setup and management smoother and more reliable: - Fixed an issue where some security modes could not be selected during setup - Improved QR code scanning to prevent duplicate screens and blank scan results - Resolved problems where certain devices were not correctly listed or selected during installation - Improved reliability of device removal, unpairing, and exclusion flows - Fixed cases where deleting a device or adding a new Z-Wave device did not work as expected - Addressed a crash that could occur when accessing Z-Wave settings 1.35 Jan 23 New • Service Package Display. Added support to properly display Lite plan and self-monitoring plans in the packages section when selected from the portal Fixes & Imrovements • Plan Selection Access. Implemented workaround to display $0 plan selection when no plan is selected, ensuring installers maintain full access to all plan management controls • Package Icons. Added visual indicators for Lite and Trial plan types in the Installer app for easier identification • General Improvements. Overall performance optimizations and stability enhancements 1.34 11/24/2025 Fixes : • MyQ Garage Door Integration: Resolved multiple issues with adding and configuring myQ Garage Door Openers, including wizard hanging during setup, plugin installation failures, and authentication flow problems. The integration process is now more reliable and consistent across different scenarios. • Sensor Configuration: Fixed an issue where sensor group changes were not being saved properly in the iOS Installer app. Sensor group assignments can now be set and saved as expected. • Device Pairing Wizard: Corrected display of installation instructions in the myQ Garage Door wizard to ensure the proper guidance is shown for each device type. Improvements : • General performance and stability enhancements across device integration workflows • Improved reliability for plugin installation and configuration processes • Enhanced error handling and user feedback during device setup 1.33 10/23/2025 Improvements: - Standardised Water Valve Icon Color The color of the Water Valve icon in the "Add New Device" section of the Installer App has been corrected to be consistent with other device icons. - Enhanced Reliability for Device Group Settings For our installers, device group settings are now more robust. The app ensures that when a setting is changed, the complete configuration is always saved correctly, preserving the integrity of the setup and all associated devices. - Accurate Entry Delay Display The Installer App now displays the precise entry delay value for sensor groups, ensuring installers have the correct information at a glance during setup. - Full Access to 'Unit Settings' on iOS Our installers can now access and manage the 'Unit Settings' page without interruption on the iOS Installer App. This allows for complete hub configuration, including time zone setup, directly from an iOS device. - Smoother 'Add Camera' Wizard When adding a new camera, the user interface now provides clearer feedback and prevents multiple submissions. This ensures a smoother setup process without confusing messages. 1.32 07/16/2025 ONVIF camera onboarding – Added support for onboarding ONVIF cameras, enabling users to connect and manage compatible devices. 1.31 05/07/2025 Improvements to the Honeywell device setup wizard 1.30 02/12/2025 Added Device Pairing Wizards for Savvi Siren R7051-V2, Ecolink Siren ISZW7-ECO and Ecolink Wireless Translator WST802 Heat, Intrusion, Gas, and Tilt sensors can now be added to Sensor Groups. Icons for Intrusion, Gas, and Tilt sensors have been restored. Sensor groups in the iOS Security Installer are now ordered by number. 1.29 02/03/2025 Added internal updates related to sensor groups. These are pre-requisites for a future feature update dependent on components in the linux firmware. 1.28 12/23/2024 Honeywell T10 Wifi Thermostat is now fully integrated 1.27 12/20/2024 Fixed issue where the 2GIG-PIR1-345 motion detector incorrectly displayed as armed on the disarmed page. The doorbell configuration page is now accessible in the iOS installer app for easier troubleshooting. Handled a scenario where new cloud calls were made with invalid authentication tokens. A recommended section of groups now appears at the top based on device category and subcategory, with all groups selectable in other sections. Group names are now searchable by name. A confirmation popup now appears when assigning a non-recommended group to a sensor. 1.26 11/18/2024 Added a fix for Onvif cameras not streaming on iOS. Fixed issue where countdown timer stops when the app is moved to the background. Scan barcode screen now closes as expected after security device inclusion. Fixed issue in Swidget Plugin where text color was not changing based on air quality value. Added blank space between value and scale and changed text color based on CO2 level sensor value. Added a space between value and scale and changing "iaq" to "IAQ" for Swidget Air Quality Sensor. Added space between value and scale and changed scale from "parts_per_billion" to "ppb" for Swidget Volatile Compound sensor. Added space between value and scale for Swidget Pressure sensor. 1.25 10/01/2024 New COPS Monitoring is now a fully integrated Professional Monitoring provider Settings menu updated to reflect options particular to the selected monitoring provider. Activate Service: Fields now dynamically displayed for selected provider. Fixes & Improvements Fixed condition incorrectly allowing the installer to start Walk Test mode during exit countdown. Fixed condition incorrectly allowing the installer to start Walk Test mode while system is armed. 1.24 09/16/2024 New and Improved Alerts and events History A new design and API for alerts have been implemented, providing an improved user experience. Smoke and CO detected alerts are now displayed correctly in Alerts. When switching to the past date and back to the current, Alerts are no longer shown empty. Camera motion detected events are now properly displayed. Solved an issue where the Walk test screen would not load correctly in the Installer App. The CLEAR button will no longer show previously tested devices as PASSED, providing accurate test results. Face and human detection capabilities are now available for the VC703, VC1103, and VC1203 Ezlo cameras. Fixed some app crashes happening during wireless onboarding. Test mode begin/end time now correctly matches account timezone. Test Mode start/end time and date are now displayed properly when Test Mode is enabled. Fixed an issue where the user address was not displayed properly in the Security Installer App. Fixed an issue where the user could move camera livestream frames in the Security Installer App. Short delay can be set on Sensors Groups menu in the Security Installer App. Addressed issue with two-way audio functionality not working correctly in the Installer App. The Installer App now allows login by partner user, enhancing user experience. 1.23 08/29/2024 Resolved issue where timezone could not be set when configuring a new controller via the Installer app on iOS, requiring a force close to function properly. 1.22 08/08/2024 Features Local streaming for cameras - Improved camera streaming experience over the local network Sensor Walk Test - now it's a lot easier to test and confirm the sensors are operating correctly Pin Codes V2 - Improved Pin Codes Management 2GIG Panic Button is now fully supported Fixes & Improvements Multiple timeline UI updates and improvements Fixed condition causing timeline/history to not be updated unless you exit and re-enter the screen Fixed issue about the Share function for the recordings Addressed condition when no chime could be heard on the Dashboard Re-added "Long Extended Delay" option in the configuration menu Corrected behavior for sensor arm state be independent between Arm/Disarm modes 1.21 06/18/2024 New features: - Manual network test - Implemented the ability to test and confirm a good network connectivity of the system 1.20 05/03/2024 New Features: Enhanced Group Delay Configuration: Users now have the ability to customize time settings for each group delay type WebRTC Infrastructure update: We're excited to introduce an update over WebRTC protocol, bringing improved real-time communication capabilities, enhanced stability, and security measures to ensure a seamless user experience. 1.19 04/01/2024
Previous Versions
Here you can find the changelog of Ezlo Protect Installer since it was posted on our website on 2024-05-21 15:46:19.
The latest version is 1.43 and it was updated on 2026-10-06 12:30:04. See below the changes in each version.
Ezlo Protect Installer version 1.43
Updated At: 2026-10-06
Changes: Version History **Professional Monitoring Enhancements:**
• Improved CMS integration and zone management
• Fixed professional monitoring activation status display
• Corrected confirmation dialogs for CMS providers
• Better security threat item handling
**Installation & Onboarding:**
• Resolved Wi-Fi onboarding issues
• Fixed app crash during device inclusion
• Added Entry/Exit delay settings for security systems
• Improved sensor group loading
**Bug Fixes:**
• Fixed UV sensor display for Aeotec Multisensor 7
• Corrected motion detection controls for cameras
• Resolved authentication and session handling issues
• Enhanced camera and device management
• Multiple stability improvements
**Performance:**
• Faster app performance with optimized diagnostics
• Improved connection reliability
• Enhanced audio session management
• Better error tracking and diagnostics 1.43 Sep 1 What's New:
This update brings important improvements to the Installer app, enhanced
sensor enrollment, and several bug fixes:
Enhanced Sensor Enrollment (345 MHz Radio Sensors):
- Improved "Learn Sensors" experience with updated icons and clearer
labeling
- Added Tamper-only and All Signals discovery modes for better sensor
detection
- Enhanced sensor information display showing device types when available
- Fixed issue where sensors could be enrolled without required sensor
group assignment
Installer App Improvements:
- Fixed camera naming issues - default names now respect 20-character
limit
- Camera rename function now displays proper text instead of technical
tokens
- Improved error message display on failed camera streams
- Fixed VistaCam 703 camera pairing timeout handling
- Resolved overlapping navigation bars on iPad
- Motion sensor status now shows user-friendly labels
Security & Device Management:
- Fixed S2 device encryption on iOS installer - devices now properly
encrypt during enrollment
- Improved Honeywell DPW plugin compatibility
- Fixed wireless setup for controller onboarding
- Streamlined sensor group assignment workflow
User Experience:
- Removed siren volume and sound selection per product requirements
- Removed unnecessary confirmation dialogs for smoother sensor group
assignments 1.42 Aug 7 Improvements related to installer access to customer accounts 1.41 Jul 10 * Added support for camera settings and AI feature configuration in the Installer app.
* Improved sensor group management and validation.
* Enhanced notification reliability and system configuration.
* General performance improvements and bug fixes. 1.40 Jun 30 Improvements related to camera onboarding 1.39 Jun 22 Bug fixes and improvements 1.38 May 29 • Improved overall app stability and performance
• Fixed minor bugs and usability issues 1.37 May 20 Added a new scanner to easily add 345 devices 1.36 May 19 We’ve fixed several issues to make device setup and management smoother and more reliable:
- Fixed an issue where some security modes could not be selected during setup
- Improved QR code scanning to prevent duplicate screens and blank scan results
- Resolved problems where certain devices were not correctly listed or selected during installation
- Improved reliability of device removal, unpairing, and exclusion flows
- Fixed cases where deleting a device or adding a new Z-Wave device did not work as expected
- Addressed a crash that could occur when accessing Z-Wave settings 1.35 Jan 23 New
• Service Package Display. Added support to properly display Lite plan and self-monitoring plans in
the packages section when selected from the portal
Fixes & Imrovements
• Plan Selection Access. Implemented workaround to display $0 plan selection when no plan is
selected, ensuring installers maintain full access to all plan management controls
• Package Icons. Added visual indicators for Lite and Trial plan types in the Installer app for easier
identification
• General Improvements. Overall performance optimizations and stability enhancements 1.34 11/24/2025 Fixes
:
• MyQ Garage Door Integration: Resolved multiple issues with adding and configuring myQ
Garage Door Openers, including wizard hanging during setup, plugin installation failures, and
authentication flow problems. The integration process is now more reliable and consistent across
different scenarios.
• Sensor Configuration: Fixed an issue where sensor group changes were not being saved properly
in the iOS Installer app. Sensor group assignments can now be set and saved as expected.
• Device Pairing Wizard: Corrected display of installation instructions in the myQ Garage Door
wizard to ensure the proper guidance is shown for each device type.
Improvements
:
• General performance and stability enhancements across device integration workflows
• Improved reliability for plugin installation and configuration processes
• Enhanced error handling and user feedback during device setup 1.33 10/23/2025 Improvements:
- Standardised Water Valve Icon Color
The color of the Water Valve icon in the "Add New Device" section of the Installer App has been corrected to be consistent with other device icons.
- Enhanced Reliability for Device Group Settings
For our installers, device group settings are now more robust. The app ensures that when a setting is changed, the complete configuration is always saved correctly, preserving the integrity of the setup and all associated devices.
- Accurate Entry Delay Display
The Installer App now displays the precise entry delay value for sensor groups, ensuring installers have the correct information at a glance during setup.
- Full Access to 'Unit Settings' on iOS
Our installers can now access and manage the 'Unit Settings' page without interruption on the iOS Installer App. This allows for complete hub configuration, including time zone setup, directly from an iOS device.
- Smoother 'Add Camera' Wizard
When adding a new camera, the user interface now provides clearer feedback and prevents multiple submissions. This ensures a smoother setup process without confusing messages. 1.32 07/16/2025 ONVIF camera onboarding – Added support for onboarding ONVIF cameras, enabling users to connect and manage compatible devices. 1.31 05/07/2025 Improvements to the Honeywell device setup wizard 1.30 02/12/2025 Added Device Pairing Wizards for Savvi Siren R7051-V2, Ecolink Siren ISZW7-ECO and Ecolink Wireless Translator WST802
Heat, Intrusion, Gas, and Tilt sensors can now be added to Sensor Groups.
Icons for Intrusion, Gas, and Tilt sensors have been restored.
Sensor groups in the iOS Security Installer are now ordered by number. 1.29 02/03/2025 Added internal updates related to sensor groups. These are pre-requisites for a future feature update dependent on components in the linux firmware. 1.28 12/23/2024 Honeywell T10 Wifi Thermostat is now fully integrated 1.27 12/20/2024 Fixed issue where the 2GIG-PIR1-345 motion detector incorrectly displayed as armed on the disarmed page.
The doorbell configuration page is now accessible in the iOS installer app for easier troubleshooting.
Handled a scenario where new cloud calls were made with invalid authentication tokens.
A recommended section of groups now appears at the top based on device category and subcategory, with all groups selectable in other sections.
Group names are now searchable by name.
A confirmation popup now appears when assigning a non-recommended group to a sensor. 1.26 11/18/2024 Added a fix for Onvif cameras not streaming on iOS.
Fixed issue where countdown timer stops when the app is moved to the background.
Scan barcode screen now closes as expected after security device inclusion.
Fixed issue in Swidget Plugin where text color was not changing based on air quality value.
Added blank space between value and scale and changed text color based on CO2 level sensor value.
Added a space between value and scale and changing "iaq" to "IAQ" for Swidget Air Quality Sensor.
Added space between value and scale and changed scale from "parts_per_billion" to "ppb" for Swidget Volatile Compound sensor.
Added space between value and scale for Swidget Pressure sensor. 1.25 10/01/2024 New
COPS Monitoring is now a fully integrated Professional Monitoring provider
Settings menu updated to reflect options particular to the selected monitoring provider.
Activate Service: Fields now dynamically displayed for selected provider.
Fixes & Improvements
Fixed condition incorrectly allowing the installer to start Walk Test mode during exit countdown.
Fixed condition incorrectly allowing the installer to start Walk Test mode while system is armed. 1.24 09/16/2024 New and Improved Alerts and events History
A new design and API for alerts have been implemented, providing an improved user experience.
Smoke and CO detected alerts are now displayed correctly in Alerts.
When switching to the past date and back to the current, Alerts are no longer shown empty.
Camera motion detected events are now properly displayed.
Solved an issue where the Walk test screen would not load correctly in the Installer App.
The CLEAR button will no longer show previously tested devices as PASSED, providing accurate test results.
Face and human detection capabilities are now available for the VC703, VC1103, and VC1203 Ezlo cameras.
Fixed some app crashes happening during wireless onboarding.
Test mode begin/end time now correctly matches account timezone.
Test Mode start/end time and date are now displayed properly when Test Mode is enabled.
Fixed an issue where the user address was not displayed properly in the Security Installer App.
Fixed an issue where the user could move camera livestream frames in the Security Installer App.
Short delay can be set on Sensors Groups menu in the Security Installer App.
Addressed issue with two-way audio functionality not working correctly in the Installer App.
The Installer App now allows login by partner user, enhancing user experience. 1.23 08/29/2024 Resolved issue where timezone could not be set when configuring a new controller via the Installer app on iOS, requiring a force close to function properly. 1.22 08/08/2024 Features
Local streaming for cameras - Improved camera streaming experience over the local network
Sensor Walk Test - now it's a lot easier to test and confirm the sensors are operating correctly
Pin Codes V2 - Improved Pin Codes Management
2GIG Panic Button is now fully supported
Fixes & Improvements
Multiple timeline UI updates and improvements
Fixed condition causing timeline/history to not be updated unless you exit and re-enter the screen
Fixed issue about the Share function for the recordings
Addressed condition when no chime could be heard on the Dashboard
Re-added "Long Extended Delay" option in the configuration menu
Corrected behavior for sensor arm state be independent between Arm/Disarm modes 1.21 06/18/2024 New features:
- Manual network test - Implemented the ability to test and confirm a good network connectivity of the system 1.20 05/03/2024 New Features:
Enhanced Group Delay Configuration: Users now have the ability to customize time settings for each group delay type
WebRTC Infrastructure update: We're excited to introduce an update over WebRTC protocol, bringing improved real-time communication capabilities, enhanced stability, and security measures to ensure a seamless user experience. 1.19 04/01/2024
Ezlo Protect Installer version 1.43
Updated At: 2026-09-04
Changes: Version History **Professional Monitoring Enhancements:**
• Improved CMS integration and zone management
• Fixed professional monitoring activation status display
• Corrected confirmation dialogs for CMS providers
• Better security threat item handling
**Installation & Onboarding:**
• Resolved Wi-Fi onboarding issues
• Fixed app crash during device inclusion
• Added Entry/Exit delay settings for security systems
• Improved sensor group loading
**Bug Fixes:**
• Fixed UV sensor display for Aeotec Multisensor 7
• Corrected motion detection controls for cameras
• Resolved authentication and session handling issues
• Enhanced camera and device management
• Multiple stability improvements
**Performance:**
• Faster app performance with optimized diagnostics
• Improved connection reliability
• Enhanced audio session management
• Better error tracking and diagnostics 1.43 2d ago What's New:
This update brings important improvements to the Installer app, enhanced
sensor enrollment, and several bug fixes:
Enhanced Sensor Enrollment (345 MHz Radio Sensors):
- Improved "Learn Sensors" experience with updated icons and clearer
labeling
- Added Tamper-only and All Signals discovery modes for better sensor
detection
- Enhanced sensor information display showing device types when available
- Fixed issue where sensors could be enrolled without required sensor
group assignment
Installer App Improvements:
- Fixed camera naming issues - default names now respect 20-character
limit
- Camera rename function now displays proper text instead of technical
tokens
- Improved error message display on failed camera streams
- Fixed VistaCam 703 camera pairing timeout handling
- Resolved overlapping navigation bars on iPad
- Motion sensor status now shows user-friendly labels
Security & Device Management:
- Fixed S2 device encryption on iOS installer - devices now properly
encrypt during enrollment
- Improved Honeywell DPW plugin compatibility
- Fixed wireless setup for controller onboarding
- Streamlined sensor group assignment workflow
User Experience:
- Removed siren volume and sound selection per product requirements
- Removed unnecessary confirmation dialogs for smoother sensor group
assignments 1.42 Aug 7 Improvements related to installer access to customer accounts 1.41 Jul 10 * Added support for camera settings and AI feature configuration in the Installer app.
* Improved sensor group management and validation.
* Enhanced notification reliability and system configuration.
* General performance improvements and bug fixes. 1.40 Jun 30 Improvements related to camera onboarding 1.39 Jun 22 Bug fixes and improvements 1.38 May 29 • Improved overall app stability and performance
• Fixed minor bugs and usability issues 1.37 May 20 Added a new scanner to easily add 345 devices 1.36 May 19 We’ve fixed several issues to make device setup and management smoother and more reliable:
- Fixed an issue where some security modes could not be selected during setup
- Improved QR code scanning to prevent duplicate screens and blank scan results
- Resolved problems where certain devices were not correctly listed or selected during installation
- Improved reliability of device removal, unpairing, and exclusion flows
- Fixed cases where deleting a device or adding a new Z-Wave device did not work as expected
- Addressed a crash that could occur when accessing Z-Wave settings 1.35 Jan 23 New
• Service Package Display. Added support to properly display Lite plan and self-monitoring plans in
the packages section when selected from the portal
Fixes & Imrovements
• Plan Selection Access. Implemented workaround to display $0 plan selection when no plan is
selected, ensuring installers maintain full access to all plan management controls
• Package Icons. Added visual indicators for Lite and Trial plan types in the Installer app for easier
identification
• General Improvements. Overall performance optimizations and stability enhancements 1.34 11/24/2025 Fixes
:
• MyQ Garage Door Integration: Resolved multiple issues with adding and configuring myQ
Garage Door Openers, including wizard hanging during setup, plugin installation failures, and
authentication flow problems. The integration process is now more reliable and consistent across
different scenarios.
• Sensor Configuration: Fixed an issue where sensor group changes were not being saved properly
in the iOS Installer app. Sensor group assignments can now be set and saved as expected.
• Device Pairing Wizard: Corrected display of installation instructions in the myQ Garage Door
wizard to ensure the proper guidance is shown for each device type.
Improvements
:
• General performance and stability enhancements across device integration workflows
• Improved reliability for plugin installation and configuration processes
• Enhanced error handling and user feedback during device setup 1.33 10/23/2025 Improvements:
- Standardised Water Valve Icon Color
The color of the Water Valve icon in the "Add New Device" section of the Installer App has been corrected to be consistent with other device icons.
- Enhanced Reliability for Device Group Settings
For our installers, device group settings are now more robust. The app ensures that when a setting is changed, the complete configuration is always saved correctly, preserving the integrity of the setup and all associated devices.
- Accurate Entry Delay Display
The Installer App now displays the precise entry delay value for sensor groups, ensuring installers have the correct information at a glance during setup.
- Full Access to 'Unit Settings' on iOS
Our installers can now access and manage the 'Unit Settings' page without interruption on the iOS Installer App. This allows for complete hub configuration, including time zone setup, directly from an iOS device.
- Smoother 'Add Camera' Wizard
When adding a new camera, the user interface now provides clearer feedback and prevents multiple submissions. This ensures a smoother setup process without confusing messages. 1.32 07/16/2025 ONVIF camera onboarding – Added support for onboarding ONVIF cameras, enabling users to connect and manage compatible devices. 1.31 05/07/2025 Improvements to the Honeywell device setup wizard 1.30 02/12/2025 Added Device Pairing Wizards for Savvi Siren R7051-V2, Ecolink Siren ISZW7-ECO and Ecolink Wireless Translator WST802
Heat, Intrusion, Gas, and Tilt sensors can now be added to Sensor Groups.
Icons for Intrusion, Gas, and Tilt sensors have been restored.
Sensor groups in the iOS Security Installer are now ordered by number. 1.29 02/03/2025 Added internal updates related to sensor groups. These are pre-requisites for a future feature update dependent on components in the linux firmware. 1.28 12/23/2024 Honeywell T10 Wifi Thermostat is now fully integrated 1.27 12/20/2024 Fixed issue where the 2GIG-PIR1-345 motion detector incorrectly displayed as armed on the disarmed page.
The doorbell configuration page is now accessible in the iOS installer app for easier troubleshooting.
Handled a scenario where new cloud calls were made with invalid authentication tokens.
A recommended section of groups now appears at the top based on device category and subcategory, with all groups selectable in other sections.
Group names are now searchable by name.
A confirmation popup now appears when assigning a non-recommended group to a sensor. 1.26 11/18/2024 Added a fix for Onvif cameras not streaming on iOS.
Fixed issue where countdown timer stops when the app is moved to the background.
Scan barcode screen now closes as expected after security device inclusion.
Fixed issue in Swidget Plugin where text color was not changing based on air quality value.
Added blank space between value and scale and changed text color based on CO2 level sensor value.
Added a space between value and scale and changing "iaq" to "IAQ" for Swidget Air Quality Sensor.
Added space between value and scale and changed scale from "parts_per_billion" to "ppb" for Swidget Volatile Compound sensor.
Added space between value and scale for Swidget Pressure sensor. 1.25 10/01/2024 New
COPS Monitoring is now a fully integrated Professional Monitoring provider
Settings menu updated to reflect options particular to the selected monitoring provider.
Activate Service: Fields now dynamically displayed for selected provider.
Fixes & Improvements
Fixed condition incorrectly allowing the installer to start Walk Test mode during exit countdown.
Fixed condition incorrectly allowing the installer to start Walk Test mode while system is armed. 1.24 09/16/2024 New and Improved Alerts and events History
A new design and API for alerts have been implemented, providing an improved user experience.
Smoke and CO detected alerts are now displayed correctly in Alerts.
When switching to the past date and back to the current, Alerts are no longer shown empty.
Camera motion detected events are now properly displayed.
Solved an issue where the Walk test screen would not load correctly in the Installer App.
The CLEAR button will no longer show previously tested devices as PASSED, providing accurate test results.
Face and human detection capabilities are now available for the VC703, VC1103, and VC1203 Ezlo cameras.
Fixed some app crashes happening during wireless onboarding.
Test mode begin/end time now correctly matches account timezone.
Test Mode start/end time and date are now displayed properly when Test Mode is enabled.
Fixed an issue where the user address was not displayed properly in the Security Installer App.
Fixed an issue where the user could move camera livestream frames in the Security Installer App.
Short delay can be set on Sensors Groups menu in the Security Installer App.
Addressed issue with two-way audio functionality not working correctly in the Installer App.
The Installer App now allows login by partner user, enhancing user experience. 1.23 08/29/2024 Resolved issue where timezone could not be set when configuring a new controller via the Installer app on iOS, requiring a force close to function properly. 1.22 08/08/2024 Features
Local streaming for cameras - Improved camera streaming experience over the local network
Sensor Walk Test - now it's a lot easier to test and confirm the sensors are operating correctly
Pin Codes V2 - Improved Pin Codes Management
2GIG Panic Button is now fully supported
Fixes & Improvements
Multiple timeline UI updates and improvements
Fixed condition causing timeline/history to not be updated unless you exit and re-enter the screen
Fixed issue about the Share function for the recordings
Addressed condition when no chime could be heard on the Dashboard
Re-added "Long Extended Delay" option in the configuration menu
Corrected behavior for sensor arm state be independent between Arm/Disarm modes 1.21 06/18/2024 New features:
- Manual network test - Implemented the ability to test and confirm a good network connectivity of the system 1.20 05/03/2024 New Features:
Enhanced Group Delay Configuration: Users now have the ability to customize time settings for each group delay type
WebRTC Infrastructure update: We're excited to introduce an update over WebRTC protocol, bringing improved real-time communication capabilities, enhanced stability, and security measures to ensure a seamless user experience. 1.19 04/01/2024
Ezlo Protect Installer version 1.42
Updated At: 2026-08-22
Changes: Version History What's New:
This update brings important improvements to the Installer app, enhanced
sensor enrollment, and several bug fixes:
Enhanced Sensor Enrollment (345 MHz Radio Sensors):
- Improved "Learn Sensors" experience with updated icons and clearer
labeling
- Added Tamper-only and All Signals discovery modes for better sensor
detection
- Enhanced sensor information display showing device types when available
- Fixed issue where sensors could be enrolled without required sensor
group assignment
Installer App Improvements:
- Fixed camera naming issues - default names now respect 20-character
limit
- Camera rename function now displays proper text instead of technical
tokens
- Improved error message display on failed camera streams
- Fixed VistaCam 703 camera pairing timeout handling
- Resolved overlapping navigation bars on iPad
- Motion sensor status now shows user-friendly labels
Security & Device Management:
- Fixed S2 device encryption on iOS installer - devices now properly
encrypt during enrollment
- Improved Honeywell DPW plugin compatibility
- Fixed wireless setup for controller onboarding
- Streamlined sensor group assignment workflow
User Experience:
- Removed siren volume and sound selection per product requirements
- Removed unnecessary confirmation dialogs for smoother sensor group
assignments 1.42 Aug 7 Improvements related to installer access to customer accounts 1.41 Jul 10 * Added support for camera settings and AI feature configuration in the Installer app.
* Improved sensor group management and validation.
* Enhanced notification reliability and system configuration.
* General performance improvements and bug fixes. 1.40 Jun 30 Improvements related to camera onboarding 1.39 Jun 22 Bug fixes and improvements 1.38 May 29 • Improved overall app stability and performance
• Fixed minor bugs and usability issues 1.37 May 20 Added a new scanner to easily add 345 devices 1.36 May 19 We’ve fixed several issues to make device setup and management smoother and more reliable:
- Fixed an issue where some security modes could not be selected during setup
- Improved QR code scanning to prevent duplicate screens and blank scan results
- Resolved problems where certain devices were not correctly listed or selected during installation
- Improved reliability of device removal, unpairing, and exclusion flows
- Fixed cases where deleting a device or adding a new Z-Wave device did not work as expected
- Addressed a crash that could occur when accessing Z-Wave settings 1.35 Jan 23 New
• Service Package Display. Added support to properly display Lite plan and self-monitoring plans in
the packages section when selected from the portal
Fixes & Imrovements
• Plan Selection Access. Implemented workaround to display $0 plan selection when no plan is
selected, ensuring installers maintain full access to all plan management controls
• Package Icons. Added visual indicators for Lite and Trial plan types in the Installer app for easier
identification
• General Improvements. Overall performance optimizations and stability enhancements 1.34 11/24/2025 Fixes
:
• MyQ Garage Door Integration: Resolved multiple issues with adding and configuring myQ
Garage Door Openers, including wizard hanging during setup, plugin installation failures, and
authentication flow problems. The integration process is now more reliable and consistent across
different scenarios.
• Sensor Configuration: Fixed an issue where sensor group changes were not being saved properly
in the iOS Installer app. Sensor group assignments can now be set and saved as expected.
• Device Pairing Wizard: Corrected display of installation instructions in the myQ Garage Door
wizard to ensure the proper guidance is shown for each device type.
Improvements
:
• General performance and stability enhancements across device integration workflows
• Improved reliability for plugin installation and configuration processes
• Enhanced error handling and user feedback during device setup 1.33 10/23/2025 Improvements:
- Standardised Water Valve Icon Color
The color of the Water Valve icon in the "Add New Device" section of the Installer App has been corrected to be consistent with other device icons.
- Enhanced Reliability for Device Group Settings
For our installers, device group settings are now more robust. The app ensures that when a setting is changed, the complete configuration is always saved correctly, preserving the integrity of the setup and all associated devices.
- Accurate Entry Delay Display
The Installer App now displays the precise entry delay value for sensor groups, ensuring installers have the correct information at a glance during setup.
- Full Access to 'Unit Settings' on iOS
Our installers can now access and manage the 'Unit Settings' page without interruption on the iOS Installer App. This allows for complete hub configuration, including time zone setup, directly from an iOS device.
- Smoother 'Add Camera' Wizard
When adding a new camera, the user interface now provides clearer feedback and prevents multiple submissions. This ensures a smoother setup process without confusing messages. 1.32 07/16/2025 ONVIF camera onboarding – Added support for onboarding ONVIF cameras, enabling users to connect and manage compatible devices. 1.31 05/07/2025 Improvements to the Honeywell device setup wizard 1.30 02/12/2025 Added Device Pairing Wizards for Savvi Siren R7051-V2, Ecolink Siren ISZW7-ECO and Ecolink Wireless Translator WST802
Heat, Intrusion, Gas, and Tilt sensors can now be added to Sensor Groups.
Icons for Intrusion, Gas, and Tilt sensors have been restored.
Sensor groups in the iOS Security Installer are now ordered by number. 1.29 02/03/2025 Added internal updates related to sensor groups. These are pre-requisites for a future feature update dependent on components in the linux firmware. 1.28 12/23/2024 Honeywell T10 Wifi Thermostat is now fully integrated 1.27 12/20/2024 Fixed issue where the 2GIG-PIR1-345 motion detector incorrectly displayed as armed on the disarmed page.
The doorbell configuration page is now accessible in the iOS installer app for easier troubleshooting.
Handled a scenario where new cloud calls were made with invalid authentication tokens.
A recommended section of groups now appears at the top based on device category and subcategory, with all groups selectable in other sections.
Group names are now searchable by name.
A confirmation popup now appears when assigning a non-recommended group to a sensor. 1.26 11/18/2024 Added a fix for Onvif cameras not streaming on iOS.
Fixed issue where countdown timer stops when the app is moved to the background.
Scan barcode screen now closes as expected after security device inclusion.
Fixed issue in Swidget Plugin where text color was not changing based on air quality value.
Added blank space between value and scale and changed text color based on CO2 level sensor value.
Added a space between value and scale and changing "iaq" to "IAQ" for Swidget Air Quality Sensor.
Added space between value and scale and changed scale from "parts_per_billion" to "ppb" for Swidget Volatile Compound sensor.
Added space between value and scale for Swidget Pressure sensor. 1.25 10/01/2024 New
COPS Monitoring is now a fully integrated Professional Monitoring provider
Settings menu updated to reflect options particular to the selected monitoring provider.
Activate Service: Fields now dynamically displayed for selected provider.
Fixes & Improvements
Fixed condition incorrectly allowing the installer to start Walk Test mode during exit countdown.
Fixed condition incorrectly allowing the installer to start Walk Test mode while system is armed. 1.24 09/16/2024 New and Improved Alerts and events History
A new design and API for alerts have been implemented, providing an improved user experience.
Smoke and CO detected alerts are now displayed correctly in Alerts.
When switching to the past date and back to the current, Alerts are no longer shown empty.
Camera motion detected events are now properly displayed.
Solved an issue where the Walk test screen would not load correctly in the Installer App.
The CLEAR button will no longer show previously tested devices as PASSED, providing accurate test results.
Face and human detection capabilities are now available for the VC703, VC1103, and VC1203 Ezlo cameras.
Fixed some app crashes happening during wireless onboarding.
Test mode begin/end time now correctly matches account timezone.
Test Mode start/end time and date are now displayed properly when Test Mode is enabled.
Fixed an issue where the user address was not displayed properly in the Security Installer App.
Fixed an issue where the user could move camera livestream frames in the Security Installer App.
Short delay can be set on Sensors Groups menu in the Security Installer App.
Addressed issue with two-way audio functionality not working correctly in the Installer App.
The Installer App now allows login by partner user, enhancing user experience. 1.23 08/29/2024 Resolved issue where timezone could not be set when configuring a new controller via the Installer app on iOS, requiring a force close to function properly. 1.22 08/08/2024 Features
Local streaming for cameras - Improved camera streaming experience over the local network
Sensor Walk Test - now it's a lot easier to test and confirm the sensors are operating correctly
Pin Codes V2 - Improved Pin Codes Management
2GIG Panic Button is now fully supported
Fixes & Improvements
Multiple timeline UI updates and improvements
Fixed condition causing timeline/history to not be updated unless you exit and re-enter the screen
Fixed issue about the Share function for the recordings
Addressed condition when no chime could be heard on the Dashboard
Re-added "Long Extended Delay" option in the configuration menu
Corrected behavior for sensor arm state be independent between Arm/Disarm modes 1.21 06/18/2024 New features:
- Manual network test - Implemented the ability to test and confirm a good network connectivity of the system 1.20 05/03/2024 New Features:
Enhanced Group Delay Configuration: Users now have the ability to customize time settings for each group delay type
WebRTC Infrastructure update: We're excited to introduce an update over WebRTC protocol, bringing improved real-time communication capabilities, enhanced stability, and security measures to ensure a seamless user experience. 1.19 04/01/2024 Generic 345 MHz sensors categories added for ease of installation
Default Entry Delays and Sensor Groups
Help and diagnostics info made available on Installer app 1.18 01/23/2024
Ezlo Protect Installer version 1.41
Updated At: 2026-07-25
Changes: Version History Improvements related to installer access to customer accounts 1.41 Jul 10 * Added support for camera settings and AI feature configuration in the Installer app.
* Improved sensor group management and validation.
* Enhanced notification reliability and system configuration.
* General performance improvements and bug fixes. 1.40 Jun 30 Improvements related to camera onboarding 1.39 Jun 22 Bug fixes and improvements 1.38 May 29 • Improved overall app stability and performance
• Fixed minor bugs and usability issues 1.37 May 20 Added a new scanner to easily add 345 devices 1.36 May 19 We’ve fixed several issues to make device setup and management smoother and more reliable:
- Fixed an issue where some security modes could not be selected during setup
- Improved QR code scanning to prevent duplicate screens and blank scan results
- Resolved problems where certain devices were not correctly listed or selected during installation
- Improved reliability of device removal, unpairing, and exclusion flows
- Fixed cases where deleting a device or adding a new Z-Wave device did not work as expected
- Addressed a crash that could occur when accessing Z-Wave settings 1.35 Jan 23 New
• Service Package Display. Added support to properly display Lite plan and self-monitoring plans in
the packages section when selected from the portal
Fixes & Imrovements
• Plan Selection Access. Implemented workaround to display $0 plan selection when no plan is
selected, ensuring installers maintain full access to all plan management controls
• Package Icons. Added visual indicators for Lite and Trial plan types in the Installer app for easier
identification
• General Improvements. Overall performance optimizations and stability enhancements 1.34 11/24/2025 Fixes
:
• MyQ Garage Door Integration: Resolved multiple issues with adding and configuring myQ
Garage Door Openers, including wizard hanging during setup, plugin installation failures, and
authentication flow problems. The integration process is now more reliable and consistent across
different scenarios.
• Sensor Configuration: Fixed an issue where sensor group changes were not being saved properly
in the iOS Installer app. Sensor group assignments can now be set and saved as expected.
• Device Pairing Wizard: Corrected display of installation instructions in the myQ Garage Door
wizard to ensure the proper guidance is shown for each device type.
Improvements
:
• General performance and stability enhancements across device integration workflows
• Improved reliability for plugin installation and configuration processes
• Enhanced error handling and user feedback during device setup 1.33 10/23/2025 Improvements:
- Standardised Water Valve Icon Color
The color of the Water Valve icon in the "Add New Device" section of the Installer App has been corrected to be consistent with other device icons.
- Enhanced Reliability for Device Group Settings
For our installers, device group settings are now more robust. The app ensures that when a setting is changed, the complete configuration is always saved correctly, preserving the integrity of the setup and all associated devices.
- Accurate Entry Delay Display
The Installer App now displays the precise entry delay value for sensor groups, ensuring installers have the correct information at a glance during setup.
- Full Access to 'Unit Settings' on iOS
Our installers can now access and manage the 'Unit Settings' page without interruption on the iOS Installer App. This allows for complete hub configuration, including time zone setup, directly from an iOS device.
- Smoother 'Add Camera' Wizard
When adding a new camera, the user interface now provides clearer feedback and prevents multiple submissions. This ensures a smoother setup process without confusing messages. 1.32 07/16/2025 ONVIF camera onboarding – Added support for onboarding ONVIF cameras, enabling users to connect and manage compatible devices. 1.31 05/07/2025 Improvements to the Honeywell device setup wizard 1.30 02/12/2025 Added Device Pairing Wizards for Savvi Siren R7051-V2, Ecolink Siren ISZW7-ECO and Ecolink Wireless Translator WST802
Heat, Intrusion, Gas, and Tilt sensors can now be added to Sensor Groups.
Icons for Intrusion, Gas, and Tilt sensors have been restored.
Sensor groups in the iOS Security Installer are now ordered by number. 1.29 02/03/2025 Added internal updates related to sensor groups. These are pre-requisites for a future feature update dependent on components in the linux firmware. 1.28 12/23/2024 Honeywell T10 Wifi Thermostat is now fully integrated 1.27 12/20/2024 Fixed issue where the 2GIG-PIR1-345 motion detector incorrectly displayed as armed on the disarmed page.
The doorbell configuration page is now accessible in the iOS installer app for easier troubleshooting.
Handled a scenario where new cloud calls were made with invalid authentication tokens.
A recommended section of groups now appears at the top based on device category and subcategory, with all groups selectable in other sections.
Group names are now searchable by name.
A confirmation popup now appears when assigning a non-recommended group to a sensor. 1.26 11/18/2024 Added a fix for Onvif cameras not streaming on iOS.
Fixed issue where countdown timer stops when the app is moved to the background.
Scan barcode screen now closes as expected after security device inclusion.
Fixed issue in Swidget Plugin where text color was not changing based on air quality value.
Added blank space between value and scale and changed text color based on CO2 level sensor value.
Added a space between value and scale and changing "iaq" to "IAQ" for Swidget Air Quality Sensor.
Added space between value and scale and changed scale from "parts_per_billion" to "ppb" for Swidget Volatile Compound sensor.
Added space between value and scale for Swidget Pressure sensor. 1.25 10/01/2024 New
COPS Monitoring is now a fully integrated Professional Monitoring provider
Settings menu updated to reflect options particular to the selected monitoring provider.
Activate Service: Fields now dynamically displayed for selected provider.
Fixes & Improvements
Fixed condition incorrectly allowing the installer to start Walk Test mode during exit countdown.
Fixed condition incorrectly allowing the installer to start Walk Test mode while system is armed. 1.24 09/16/2024 New and Improved Alerts and events History
A new design and API for alerts have been implemented, providing an improved user experience.
Smoke and CO detected alerts are now displayed correctly in Alerts.
When switching to the past date and back to the current, Alerts are no longer shown empty.
Camera motion detected events are now properly displayed.
Solved an issue where the Walk test screen would not load correctly in the Installer App.
The CLEAR button will no longer show previously tested devices as PASSED, providing accurate test results.
Face and human detection capabilities are now available for the VC703, VC1103, and VC1203 Ezlo cameras.
Fixed some app crashes happening during wireless onboarding.
Test mode begin/end time now correctly matches account timezone.
Test Mode start/end time and date are now displayed properly when Test Mode is enabled.
Fixed an issue where the user address was not displayed properly in the Security Installer App.
Fixed an issue where the user could move camera livestream frames in the Security Installer App.
Short delay can be set on Sensors Groups menu in the Security Installer App.
Addressed issue with two-way audio functionality not working correctly in the Installer App.
The Installer App now allows login by partner user, enhancing user experience. 1.23 08/29/2024 Resolved issue where timezone could not be set when configuring a new controller via the Installer app on iOS, requiring a force close to function properly. 1.22 08/08/2024 Features
Local streaming for cameras - Improved camera streaming experience over the local network
Sensor Walk Test - now it's a lot easier to test and confirm the sensors are operating correctly
Pin Codes V2 - Improved Pin Codes Management
2GIG Panic Button is now fully supported
Fixes & Improvements
Multiple timeline UI updates and improvements
Fixed condition causing timeline/history to not be updated unless you exit and re-enter the screen
Fixed issue about the Share function for the recordings
Addressed condition when no chime could be heard on the Dashboard
Re-added "Long Extended Delay" option in the configuration menu
Corrected behavior for sensor arm state be independent between Arm/Disarm modes 1.21 06/18/2024 New features:
- Manual network test - Implemented the ability to test and confirm a good network connectivity of the system 1.20 05/03/2024 New Features:
Enhanced Group Delay Configuration: Users now have the ability to customize time settings for each group delay type
WebRTC Infrastructure update: We're excited to introduce an update over WebRTC protocol, bringing improved real-time communication capabilities, enhanced stability, and security measures to ensure a seamless user experience. 1.19 04/01/2024 Generic 345 MHz sensors categories added for ease of installation
Default Entry Delays and Sensor Groups
Help and diagnostics info made available on Installer app 1.18 01/23/2024 Fixed a bug about missing icon in wireless camera pairing process
Added ability to pair Generic 345 Mhz devices based on device type
Added multiple DNIS (Receiver ID) selection while activating CMS for customer
Added chime selection option for individual sensors. 1.17 11/10/2023
Ezlo Protect Installer version 1.40
Updated At: 2026-07-08
Changes: Version History * Added support for camera settings and AI feature configuration in the Installer app.
* Improved sensor group management and validation.
* Enhanced notification reliability and system configuration.
* General performance improvements and bug fixes. 1.40 Jun 30 Improvements related to camera onboarding 1.39 Jun 22 Bug fixes and improvements 1.38 May 29 • Improved overall app stability and performance
• Fixed minor bugs and usability issues 1.37 May 20 Added a new scanner to easily add 345 devices 1.36 May 19 We’ve fixed several issues to make device setup and management smoother and more reliable:
- Fixed an issue where some security modes could not be selected during setup
- Improved QR code scanning to prevent duplicate screens and blank scan results
- Resolved problems where certain devices were not correctly listed or selected during installation
- Improved reliability of device removal, unpairing, and exclusion flows
- Fixed cases where deleting a device or adding a new Z-Wave device did not work as expected
- Addressed a crash that could occur when accessing Z-Wave settings 1.35 Jan 23 New
• Service Package Display. Added support to properly display Lite plan and self-monitoring plans in
the packages section when selected from the portal
Fixes & Imrovements
• Plan Selection Access. Implemented workaround to display $0 plan selection when no plan is
selected, ensuring installers maintain full access to all plan management controls
• Package Icons. Added visual indicators for Lite and Trial plan types in the Installer app for easier
identification
• General Improvements. Overall performance optimizations and stability enhancements 1.34 11/24/2025 Fixes
:
• MyQ Garage Door Integration: Resolved multiple issues with adding and configuring myQ
Garage Door Openers, including wizard hanging during setup, plugin installation failures, and
authentication flow problems. The integration process is now more reliable and consistent across
different scenarios.
• Sensor Configuration: Fixed an issue where sensor group changes were not being saved properly
in the iOS Installer app. Sensor group assignments can now be set and saved as expected.
• Device Pairing Wizard: Corrected display of installation instructions in the myQ Garage Door
wizard to ensure the proper guidance is shown for each device type.
Improvements
:
• General performance and stability enhancements across device integration workflows
• Improved reliability for plugin installation and configuration processes
• Enhanced error handling and user feedback during device setup 1.33 10/23/2025 Improvements:
- Standardised Water Valve Icon Color
The color of the Water Valve icon in the "Add New Device" section of the Installer App has been corrected to be consistent with other device icons.
- Enhanced Reliability for Device Group Settings
For our installers, device group settings are now more robust. The app ensures that when a setting is changed, the complete configuration is always saved correctly, preserving the integrity of the setup and all associated devices.
- Accurate Entry Delay Display
The Installer App now displays the precise entry delay value for sensor groups, ensuring installers have the correct information at a glance during setup.
- Full Access to 'Unit Settings' on iOS
Our installers can now access and manage the 'Unit Settings' page without interruption on the iOS Installer App. This allows for complete hub configuration, including time zone setup, directly from an iOS device.
- Smoother 'Add Camera' Wizard
When adding a new camera, the user interface now provides clearer feedback and prevents multiple submissions. This ensures a smoother setup process without confusing messages. 1.32 07/16/2025 ONVIF camera onboarding – Added support for onboarding ONVIF cameras, enabling users to connect and manage compatible devices. 1.31 05/07/2025 Improvements to the Honeywell device setup wizard 1.30 02/12/2025 Added Device Pairing Wizards for Savvi Siren R7051-V2, Ecolink Siren ISZW7-ECO and Ecolink Wireless Translator WST802
Heat, Intrusion, Gas, and Tilt sensors can now be added to Sensor Groups.
Icons for Intrusion, Gas, and Tilt sensors have been restored.
Sensor groups in the iOS Security Installer are now ordered by number. 1.29 02/03/2025 Added internal updates related to sensor groups. These are pre-requisites for a future feature update dependent on components in the linux firmware. 1.28 12/23/2024 Honeywell T10 Wifi Thermostat is now fully integrated 1.27 12/20/2024 Fixed issue where the 2GIG-PIR1-345 motion detector incorrectly displayed as armed on the disarmed page.
The doorbell configuration page is now accessible in the iOS installer app for easier troubleshooting.
Handled a scenario where new cloud calls were made with invalid authentication tokens.
A recommended section of groups now appears at the top based on device category and subcategory, with all groups selectable in other sections.
Group names are now searchable by name.
A confirmation popup now appears when assigning a non-recommended group to a sensor. 1.26 11/18/2024 Added a fix for Onvif cameras not streaming on iOS.
Fixed issue where countdown timer stops when the app is moved to the background.
Scan barcode screen now closes as expected after security device inclusion.
Fixed issue in Swidget Plugin where text color was not changing based on air quality value.
Added blank space between value and scale and changed text color based on CO2 level sensor value.
Added a space between value and scale and changing "iaq" to "IAQ" for Swidget Air Quality Sensor.
Added space between value and scale and changed scale from "parts_per_billion" to "ppb" for Swidget Volatile Compound sensor.
Added space between value and scale for Swidget Pressure sensor. 1.25 10/01/2024 New
COPS Monitoring is now a fully integrated Professional Monitoring provider
Settings menu updated to reflect options particular to the selected monitoring provider.
Activate Service: Fields now dynamically displayed for selected provider.
Fixes & Improvements
Fixed condition incorrectly allowing the installer to start Walk Test mode during exit countdown.
Fixed condition incorrectly allowing the installer to start Walk Test mode while system is armed. 1.24 09/16/2024 New and Improved Alerts and events History
A new design and API for alerts have been implemented, providing an improved user experience.
Smoke and CO detected alerts are now displayed correctly in Alerts.
When switching to the past date and back to the current, Alerts are no longer shown empty.
Camera motion detected events are now properly displayed.
Solved an issue where the Walk test screen would not load correctly in the Installer App.
The CLEAR button will no longer show previously tested devices as PASSED, providing accurate test results.
Face and human detection capabilities are now available for the VC703, VC1103, and VC1203 Ezlo cameras.
Fixed some app crashes happening during wireless onboarding.
Test mode begin/end time now correctly matches account timezone.
Test Mode start/end time and date are now displayed properly when Test Mode is enabled.
Fixed an issue where the user address was not displayed properly in the Security Installer App.
Fixed an issue where the user could move camera livestream frames in the Security Installer App.
Short delay can be set on Sensors Groups menu in the Security Installer App.
Addressed issue with two-way audio functionality not working correctly in the Installer App.
The Installer App now allows login by partner user, enhancing user experience. 1.23 08/29/2024 Resolved issue where timezone could not be set when configuring a new controller via the Installer app on iOS, requiring a force close to function properly. 1.22 08/08/2024 Features
Local streaming for cameras - Improved camera streaming experience over the local network
Sensor Walk Test - now it's a lot easier to test and confirm the sensors are operating correctly
Pin Codes V2 - Improved Pin Codes Management
2GIG Panic Button is now fully supported
Fixes & Improvements
Multiple timeline UI updates and improvements
Fixed condition causing timeline/history to not be updated unless you exit and re-enter the screen
Fixed issue about the Share function for the recordings
Addressed condition when no chime could be heard on the Dashboard
Re-added "Long Extended Delay" option in the configuration menu
Corrected behavior for sensor arm state be independent between Arm/Disarm modes 1.21 06/18/2024 New features:
- Manual network test - Implemented the ability to test and confirm a good network connectivity of the system 1.20 05/03/2024 New Features:
Enhanced Group Delay Configuration: Users now have the ability to customize time settings for each group delay type
WebRTC Infrastructure update: We're excited to introduce an update over WebRTC protocol, bringing improved real-time communication capabilities, enhanced stability, and security measures to ensure a seamless user experience. 1.19 04/01/2024 Generic 345 MHz sensors categories added for ease of installation
Default Entry Delays and Sensor Groups
Help and diagnostics info made available on Installer app 1.18 01/23/2024 Fixed a bug about missing icon in wireless camera pairing process
Added ability to pair Generic 345 Mhz devices based on device type
Added multiple DNIS (Receiver ID) selection while activating CMS for customer
Added chime selection option for individual sensors. 1.17 11/10/2023 Fixed issue causing the Installer app to get stuck on the splash screen.
Resolved crash in Protect app when accessing sound settings in Controller Siren under Devices. 1.16 10/19/2023
Ezlo Protect Installer version 1.39
Updated At: 2026-06-30
Changes: Version History Improvements related to camera onboarding 1.39 Jun 22 Bug fixes and improvements 1.38 May 29 • Improved overall app stability and performance
• Fixed minor bugs and usability issues 1.37 May 20 Added a new scanner to easily add 345 devices 1.36 May 19 We’ve fixed several issues to make device setup and management smoother and more reliable:
- Fixed an issue where some security modes could not be selected during setup
- Improved QR code scanning to prevent duplicate screens and blank scan results
- Resolved problems where certain devices were not correctly listed or selected during installation
- Improved reliability of device removal, unpairing, and exclusion flows
- Fixed cases where deleting a device or adding a new Z-Wave device did not work as expected
- Addressed a crash that could occur when accessing Z-Wave settings 1.35 Jan 23 New
• Service Package Display. Added support to properly display Lite plan and self-monitoring plans in
the packages section when selected from the portal
Fixes & Imrovements
• Plan Selection Access. Implemented workaround to display $0 plan selection when no plan is
selected, ensuring installers maintain full access to all plan management controls
• Package Icons. Added visual indicators for Lite and Trial plan types in the Installer app for easier
identification
• General Improvements. Overall performance optimizations and stability enhancements 1.34 11/24/2025 Fixes
:
• MyQ Garage Door Integration: Resolved multiple issues with adding and configuring myQ
Garage Door Openers, including wizard hanging during setup, plugin installation failures, and
authentication flow problems. The integration process is now more reliable and consistent across
different scenarios.
• Sensor Configuration: Fixed an issue where sensor group changes were not being saved properly
in the iOS Installer app. Sensor group assignments can now be set and saved as expected.
• Device Pairing Wizard: Corrected display of installation instructions in the myQ Garage Door
wizard to ensure the proper guidance is shown for each device type.
Improvements
:
• General performance and stability enhancements across device integration workflows
• Improved reliability for plugin installation and configuration processes
• Enhanced error handling and user feedback during device setup 1.33 10/23/2025 Improvements:
- Standardised Water Valve Icon Color
The color of the Water Valve icon in the "Add New Device" section of the Installer App has been corrected to be consistent with other device icons.
- Enhanced Reliability for Device Group Settings
For our installers, device group settings are now more robust. The app ensures that when a setting is changed, the complete configuration is always saved correctly, preserving the integrity of the setup and all associated devices.
- Accurate Entry Delay Display
The Installer App now displays the precise entry delay value for sensor groups, ensuring installers have the correct information at a glance during setup.
- Full Access to 'Unit Settings' on iOS
Our installers can now access and manage the 'Unit Settings' page without interruption on the iOS Installer App. This allows for complete hub configuration, including time zone setup, directly from an iOS device.
- Smoother 'Add Camera' Wizard
When adding a new camera, the user interface now provides clearer feedback and prevents multiple submissions. This ensures a smoother setup process without confusing messages. 1.32 07/16/2025 ONVIF camera onboarding – Added support for onboarding ONVIF cameras, enabling users to connect and manage compatible devices. 1.31 05/07/2025 Improvements to the Honeywell device setup wizard 1.30 02/12/2025 Added Device Pairing Wizards for Savvi Siren R7051-V2, Ecolink Siren ISZW7-ECO and Ecolink Wireless Translator WST802
Heat, Intrusion, Gas, and Tilt sensors can now be added to Sensor Groups.
Icons for Intrusion, Gas, and Tilt sensors have been restored.
Sensor groups in the iOS Security Installer are now ordered by number. 1.29 02/03/2025 Added internal updates related to sensor groups. These are pre-requisites for a future feature update dependent on components in the linux firmware. 1.28 12/23/2024 Honeywell T10 Wifi Thermostat is now fully integrated 1.27 12/20/2024 Fixed issue where the 2GIG-PIR1-345 motion detector incorrectly displayed as armed on the disarmed page.
The doorbell configuration page is now accessible in the iOS installer app for easier troubleshooting.
Handled a scenario where new cloud calls were made with invalid authentication tokens.
A recommended section of groups now appears at the top based on device category and subcategory, with all groups selectable in other sections.
Group names are now searchable by name.
A confirmation popup now appears when assigning a non-recommended group to a sensor. 1.26 11/18/2024 Added a fix for Onvif cameras not streaming on iOS.
Fixed issue where countdown timer stops when the app is moved to the background.
Scan barcode screen now closes as expected after security device inclusion.
Fixed issue in Swidget Plugin where text color was not changing based on air quality value.
Added blank space between value and scale and changed text color based on CO2 level sensor value.
Added a space between value and scale and changing "iaq" to "IAQ" for Swidget Air Quality Sensor.
Added space between value and scale and changed scale from "parts_per_billion" to "ppb" for Swidget Volatile Compound sensor.
Added space between value and scale for Swidget Pressure sensor. 1.25 10/01/2024 New
COPS Monitoring is now a fully integrated Professional Monitoring provider
Settings menu updated to reflect options particular to the selected monitoring provider.
Activate Service: Fields now dynamically displayed for selected provider.
Fixes & Improvements
Fixed condition incorrectly allowing the installer to start Walk Test mode during exit countdown.
Fixed condition incorrectly allowing the installer to start Walk Test mode while system is armed. 1.24 09/16/2024 New and Improved Alerts and events History
A new design and API for alerts have been implemented, providing an improved user experience.
Smoke and CO detected alerts are now displayed correctly in Alerts.
When switching to the past date and back to the current, Alerts are no longer shown empty.
Camera motion detected events are now properly displayed.
Solved an issue where the Walk test screen would not load correctly in the Installer App.
The CLEAR button will no longer show previously tested devices as PASSED, providing accurate test results.
Face and human detection capabilities are now available for the VC703, VC1103, and VC1203 Ezlo cameras.
Fixed some app crashes happening during wireless onboarding.
Test mode begin/end time now correctly matches account timezone.
Test Mode start/end time and date are now displayed properly when Test Mode is enabled.
Fixed an issue where the user address was not displayed properly in the Security Installer App.
Fixed an issue where the user could move camera livestream frames in the Security Installer App.
Short delay can be set on Sensors Groups menu in the Security Installer App.
Addressed issue with two-way audio functionality not working correctly in the Installer App.
The Installer App now allows login by partner user, enhancing user experience. 1.23 08/29/2024 Resolved issue where timezone could not be set when configuring a new controller via the Installer app on iOS, requiring a force close to function properly. 1.22 08/08/2024 Features
Local streaming for cameras - Improved camera streaming experience over the local network
Sensor Walk Test - now it's a lot easier to test and confirm the sensors are operating correctly
Pin Codes V2 - Improved Pin Codes Management
2GIG Panic Button is now fully supported
Fixes & Improvements
Multiple timeline UI updates and improvements
Fixed condition causing timeline/history to not be updated unless you exit and re-enter the screen
Fixed issue about the Share function for the recordings
Addressed condition when no chime could be heard on the Dashboard
Re-added "Long Extended Delay" option in the configuration menu
Corrected behavior for sensor arm state be independent between Arm/Disarm modes 1.21 06/18/2024 New features:
- Manual network test - Implemented the ability to test and confirm a good network connectivity of the system 1.20 05/03/2024 New Features:
Enhanced Group Delay Configuration: Users now have the ability to customize time settings for each group delay type
WebRTC Infrastructure update: We're excited to introduce an update over WebRTC protocol, bringing improved real-time communication capabilities, enhanced stability, and security measures to ensure a seamless user experience. 1.19 04/01/2024 Generic 345 MHz sensors categories added for ease of installation
Default Entry Delays and Sensor Groups
Help and diagnostics info made available on Installer app 1.18 01/23/2024 Fixed a bug about missing icon in wireless camera pairing process
Added ability to pair Generic 345 Mhz devices based on device type
Added multiple DNIS (Receiver ID) selection while activating CMS for customer
Added chime selection option for individual sensors. 1.17 11/10/2023 Fixed issue causing the Installer app to get stuck on the splash screen.
Resolved crash in Protect app when accessing sound settings in Controller Siren under Devices. 1.16 10/19/2023 - Accessing Resident account on behalf of resident is now restricted with permission from resident himself
- Added activation option for cellular backup plan
- Fixed issue with Doorbell camera not going back to Devices when in fullscreen
- Security Settings Menu re-organized 1.15 10/02/2023
Ezlo Protect Installer version 1.38
Updated At: 2026-06-03
Changes: Version History Bug fixes and improvements 1.38 4d ago • Improved overall app stability and performance
• Fixed minor bugs and usability issues 1.37 May 20 Added a new scanner to easily add 345 devices 1.36 May 19 We’ve fixed several issues to make device setup and management smoother and more reliable:
- Fixed an issue where some security modes could not be selected during setup
- Improved QR code scanning to prevent duplicate screens and blank scan results
- Resolved problems where certain devices were not correctly listed or selected during installation
- Improved reliability of device removal, unpairing, and exclusion flows
- Fixed cases where deleting a device or adding a new Z-Wave device did not work as expected
- Addressed a crash that could occur when accessing Z-Wave settings 1.35 Jan 23 New
• Service Package Display. Added support to properly display Lite plan and self-monitoring plans in
the packages section when selected from the portal
Fixes & Imrovements
• Plan Selection Access. Implemented workaround to display $0 plan selection when no plan is
selected, ensuring installers maintain full access to all plan management controls
• Package Icons. Added visual indicators for Lite and Trial plan types in the Installer app for easier
identification
• General Improvements. Overall performance optimizations and stability enhancements 1.34 11/24/2025 Fixes
:
• MyQ Garage Door Integration: Resolved multiple issues with adding and configuring myQ
Garage Door Openers, including wizard hanging during setup, plugin installation failures, and
authentication flow problems. The integration process is now more reliable and consistent across
different scenarios.
• Sensor Configuration: Fixed an issue where sensor group changes were not being saved properly
in the iOS Installer app. Sensor group assignments can now be set and saved as expected.
• Device Pairing Wizard: Corrected display of installation instructions in the myQ Garage Door
wizard to ensure the proper guidance is shown for each device type.
Improvements
:
• General performance and stability enhancements across device integration workflows
• Improved reliability for plugin installation and configuration processes
• Enhanced error handling and user feedback during device setup 1.33 10/23/2025 Improvements:
- Standardised Water Valve Icon Color
The color of the Water Valve icon in the "Add New Device" section of the Installer App has been corrected to be consistent with other device icons.
- Enhanced Reliability for Device Group Settings
For our installers, device group settings are now more robust. The app ensures that when a setting is changed, the complete configuration is always saved correctly, preserving the integrity of the setup and all associated devices.
- Accurate Entry Delay Display
The Installer App now displays the precise entry delay value for sensor groups, ensuring installers have the correct information at a glance during setup.
- Full Access to 'Unit Settings' on iOS
Our installers can now access and manage the 'Unit Settings' page without interruption on the iOS Installer App. This allows for complete hub configuration, including time zone setup, directly from an iOS device.
- Smoother 'Add Camera' Wizard
When adding a new camera, the user interface now provides clearer feedback and prevents multiple submissions. This ensures a smoother setup process without confusing messages. 1.32 07/16/2025 ONVIF camera onboarding – Added support for onboarding ONVIF cameras, enabling users to connect and manage compatible devices. 1.31 05/07/2025 Improvements to the Honeywell device setup wizard 1.30 02/12/2025 Added Device Pairing Wizards for Savvi Siren R7051-V2, Ecolink Siren ISZW7-ECO and Ecolink Wireless Translator WST802
Heat, Intrusion, Gas, and Tilt sensors can now be added to Sensor Groups.
Icons for Intrusion, Gas, and Tilt sensors have been restored.
Sensor groups in the iOS Security Installer are now ordered by number. 1.29 02/03/2025 Added internal updates related to sensor groups. These are pre-requisites for a future feature update dependent on components in the linux firmware. 1.28 12/23/2024 Honeywell T10 Wifi Thermostat is now fully integrated 1.27 12/20/2024 Fixed issue where the 2GIG-PIR1-345 motion detector incorrectly displayed as armed on the disarmed page.
The doorbell configuration page is now accessible in the iOS installer app for easier troubleshooting.
Handled a scenario where new cloud calls were made with invalid authentication tokens.
A recommended section of groups now appears at the top based on device category and subcategory, with all groups selectable in other sections.
Group names are now searchable by name.
A confirmation popup now appears when assigning a non-recommended group to a sensor. 1.26 11/18/2024 Added a fix for Onvif cameras not streaming on iOS.
Fixed issue where countdown timer stops when the app is moved to the background.
Scan barcode screen now closes as expected after security device inclusion.
Fixed issue in Swidget Plugin where text color was not changing based on air quality value.
Added blank space between value and scale and changed text color based on CO2 level sensor value.
Added a space between value and scale and changing "iaq" to "IAQ" for Swidget Air Quality Sensor.
Added space between value and scale and changed scale from "parts_per_billion" to "ppb" for Swidget Volatile Compound sensor.
Added space between value and scale for Swidget Pressure sensor. 1.25 10/01/2024 New
COPS Monitoring is now a fully integrated Professional Monitoring provider
Settings menu updated to reflect options particular to the selected monitoring provider.
Activate Service: Fields now dynamically displayed for selected provider.
Fixes & Improvements
Fixed condition incorrectly allowing the installer to start Walk Test mode during exit countdown.
Fixed condition incorrectly allowing the installer to start Walk Test mode while system is armed. 1.24 09/16/2024 New and Improved Alerts and events History
A new design and API for alerts have been implemented, providing an improved user experience.
Smoke and CO detected alerts are now displayed correctly in Alerts.
When switching to the past date and back to the current, Alerts are no longer shown empty.
Camera motion detected events are now properly displayed.
Solved an issue where the Walk test screen would not load correctly in the Installer App.
The CLEAR button will no longer show previously tested devices as PASSED, providing accurate test results.
Face and human detection capabilities are now available for the VC703, VC1103, and VC1203 Ezlo cameras.
Fixed some app crashes happening during wireless onboarding.
Test mode begin/end time now correctly matches account timezone.
Test Mode start/end time and date are now displayed properly when Test Mode is enabled.
Fixed an issue where the user address was not displayed properly in the Security Installer App.
Fixed an issue where the user could move camera livestream frames in the Security Installer App.
Short delay can be set on Sensors Groups menu in the Security Installer App.
Addressed issue with two-way audio functionality not working correctly in the Installer App.
The Installer App now allows login by partner user, enhancing user experience. 1.23 08/29/2024 Resolved issue where timezone could not be set when configuring a new controller via the Installer app on iOS, requiring a force close to function properly. 1.22 08/08/2024 Features
Local streaming for cameras - Improved camera streaming experience over the local network
Sensor Walk Test - now it's a lot easier to test and confirm the sensors are operating correctly
Pin Codes V2 - Improved Pin Codes Management
2GIG Panic Button is now fully supported
Fixes & Improvements
Multiple timeline UI updates and improvements
Fixed condition causing timeline/history to not be updated unless you exit and re-enter the screen
Fixed issue about the Share function for the recordings
Addressed condition when no chime could be heard on the Dashboard
Re-added "Long Extended Delay" option in the configuration menu
Corrected behavior for sensor arm state be independent between Arm/Disarm modes 1.21 06/18/2024 New features:
- Manual network test - Implemented the ability to test and confirm a good network connectivity of the system 1.20 05/03/2024 New Features:
Enhanced Group Delay Configuration: Users now have the ability to customize time settings for each group delay type
WebRTC Infrastructure update: We're excited to introduce an update over WebRTC protocol, bringing improved real-time communication capabilities, enhanced stability, and security measures to ensure a seamless user experience. 1.19 04/01/2024 Generic 345 MHz sensors categories added for ease of installation
Default Entry Delays and Sensor Groups
Help and diagnostics info made available on Installer app 1.18 01/23/2024 Fixed a bug about missing icon in wireless camera pairing process
Added ability to pair Generic 345 Mhz devices based on device type
Added multiple DNIS (Receiver ID) selection while activating CMS for customer
Added chime selection option for individual sensors. 1.17 11/10/2023 Fixed issue causing the Installer app to get stuck on the splash screen.
Resolved crash in Protect app when accessing sound settings in Controller Siren under Devices. 1.16 10/19/2023 - Accessing Resident account on behalf of resident is now restricted with permission from resident himself
- Added activation option for cellular backup plan
- Fixed issue with Doorbell camera not going back to Devices when in fullscreen
- Security Settings Menu re-organized 1.15 10/02/2023 Fixed AccountID validation algorithm for Professional Monitoring 1.14 08/17/2023
Ezlo Protect Installer version 1.35
Updated At: 2026-01-23
Changes: We’ve fixed several issues to make device setup and management smoother and more reliable:
- Fixed an issue where some security modes could not be selected during setup
- Improved QR code scanning to prevent duplicate screens and blank scan results
- Resolved problems where certain devices were not correctly listed or selected during installation
- Improved reliability of device removal, unpairing, and exclusion flows
- Fixed cases where deleting a device or adding a new Z-Wave device did not work as expected
- Addressed a crash that could occur when accessing Z-Wave settings
Ezlo Protect Installer version 1.32
Updated At: 2025-07-16
Changes: Jul 16, 2025
Version 1.32
Improvements:
- Standardised Water Valve Icon Color
The color of the Water Valve icon in the "Add New Device" section of the Installer App has been corrected to be consistent with other device icons.
- Enhanced Reliability for Device Group Settings
For our installers, device group settings are now more robust. The app ensures that when a setting is changed, the complete configuration is always saved correctly, preserving the integrity of the setup and all associated devices.
- Accurate Entry Delay Display
The Installer App now displays the precise entry delay value for sensor groups, ensuring installers have the correct information at a glance during setup.
- Full Access to 'Unit Settings' on iOS
Our installers can now access and manage the 'Unit Settings' page without interruption on the iOS Installer App. This allows for complete hub configuration, including time zone setup, directly from an iOS device.
- Smoother 'Add Camera' Wizard
When adding a new camera, the user interface now provides clearer feedback and prevents multiple submissions. This ensures a smoother setup process without confusing messages.
Ezlo Protect Installer version 1.31
Updated At: 2025-05-07
Changes: May 7, 2025
Version 1.31
ONVIF camera onboarding – Added support for onboarding ONVIF cameras, enabling users to connect and manage compatible devices.
